|
Description
|
1.Preparation: The valve of propane gas tank tie with transfer hose, then check again, be sure has tighten and no leak gas for safety.
2.Firing: 1st step, open the valve of propane gas tank. 2nd step, open jet pilot to make a fire on jet pot. 3rd step, open jet net, and fire on all plate and then put out the fire.
3.Air Adjustment: If jet net has firing garnet, this is showing lack air. In this case, turn up air adjustment ring until fire becoming sky blue with light red flame on the bottom of burner.
4.Shut Fire Off: Turn off all "pilot cock", then fire be shut off. Close the outlet valve of propane gas tank for keep safety.
5.Warning: *After using, flush with water. Use cleaner if there is any dirt. *"Gas jet net" keeps away moisture. *After using the heat-resisting stainless steel cover, clean the dirt and put it back to original position.
|
